opiniones/producto
StarTech.com 25S22M2NGFFR Schnittstellenkarte/Adapter
71,92€
Möchtest du eine Frage an die Community stellen?
Wenn du Fragen hast, zögere nicht, sie zu stellen, damit andere Benutzer oder unser Support-Team dir bei der Lösung helfen können.
Bewertungen - StarTech.com 25S22M2NGFFR Schnittstellenkarte/Adapter
3.4
15 Bewertungen100%
Empfehlen13 Empfehlungen- 58
- 40
- 31
- 22
- 14
Hinterlasse deine Meinung
Es wird dich nur eine Minute kosten, aber du wirst den Leuten helfen, sich zu entscheiden.
Opiniones de usuarios
13 Bewertungen
- Mehr relevant
- Neueste
- Älteste
g
gochymanHervorgehobene Meinung
Hace 4 años
Precio elevado, buena carcasa y con todo lo necesario. T
TW9YLLCHace 5 años
been toying this for several days even with the excellent technical support it will let me configure as Span used disk part & 2 different manufactures m.2 drives (2) 256 GB (2) 500GB when I set the raid in jbod mode raid 1 or concentation mode it reboots my PC have tried it on 3 different machines
... Ursprünglich veröffentlicht auf StartechR
RustyintegraleHace 4 años
I've been looking at this adapter for some time now and finally decided to buy one together with two Western Digital 1TB M2 blades. I wanted it set up as JBOD so I can just see two 1TB volumes in a MacBook Pro. Both blades will work but only individually. Surely the RAID capability is this adapter's... Ursprünglich veröffentlicht auf StartechP
PablomepHace 7 años
I was so interested in using two different size, different manufacturer M.2 SSD's in my one SSD slot laptop. I thought it was just plug-and-play, but the second SSD never appeared listed in a windows installation session, even using DISKPART. So I thought it was a configure-first issue, and bought a... Ursprünglich veröffentlicht auf StartechR
RootAlexHace 7 años
This device is good for Windows or Linux computers but for Macintosh it is awful, I bought one and did the raid 0 on two Toshiba 128 gb with APFS and got and average sequential read speed of 8~9mb and 234mb write. But on my Windows I did get read speed of 1400mb and write 240mb. Ursprünglich veröffentlicht auf StartechL
LycanHace 4 años
I already have 2. They're functional.
Haven't put them under significant load yet.
I've got two each with two 256GB SATA m.2 drives, and two additional 500GB SATA SSDs, in a RAIDZ
About what you'd expect. 500MB/sec per link.
I had to put them into RAID0 mode, because SAS doesn't support SATA PMP.
So... Ursprünglich veröffentlicht auf StartechM
MacphotoHace 8 años
Used this adapter in a fairly new Lenovo computer and found that the speed gains were impressive. This adapter is easy to use. This is partially because it is hard to mess us M.2 installs as they only fit one way. I set the jumpers to span as for this purpose I just wanted one big drive out of th... Ursprünglich veröffentlicht auf Startech1
1nivek1Hace 8 años
This is an excellent device that was easy to setup. It even came with a small screw driver. I replaced my hard drive in my laptop with it and immediately noticed a significant increase in speeds. Ursprünglich veröffentlicht auf StartechJ
JohnE2Hace 4 años
I have found that the Windows monitoring software for RAIDON GR3380-SB3 also works for this drive. So that solves my problem and I can now give 5 stars. Ursprünglich veröffentlicht auf StartechH
HenmartyHace 6 años
I bought this for the sole purpose of running in an external caddy to be ran in jbod mode thinking that i could run drive 1 as an enterprise windows to go drive and to have drive 2 configured with microsoft deployment toolkit with other winpe based tools such a shame this is not possible as this wou... Ursprünglich veröffentlicht auf StartechA
Andrew11Hace 8 años
I always thought that upgrading a laptop with an M.2 drive would be a long way off, but it seems like you blink and it’s time! Now I don’t have to worry about what to do with that smaller drive, I can hand-me-down to another machine with a standard SATA bay. The adapter itself is very well designed ... Ursprünglich veröffentlicht auf StartechJ
JohnEHace 4 años
I bought this to set up a resilient RAID 1 system, and it works well. However, the only way to confirm it's working is to write to the array, shutdown, remove one drive, reboot and then see if the file you wrote is still there. Then, repeat for the second drive.
The problem is that using hardware... Ursprünglich veröffentlicht auf StartechJ
Julio2rHace 9 años
I bought this adapter in hopes to utilize the sata m.2 drives that I had ordered instead of the pcie version. The idea seems like a good one, other than the fact you RAID 0 (2) M.2 drives capable of speeds of up to 540 MB/s and sequential write speeds of up to 500 MB/s to be bottle necked into a 600... Ursprünglich veröffentlicht auf StartechVerifizierte Meinung
Unser "verifizierte Bewertung" Label garantiert, dass diese Bewertung vom selben Benutzer stammt, der das Produkt auf unserer Website gekauft hat. Wir überprüfen die Echtheit der Käufe und entsprechenden Bewertungen, um sicherzustellen, dass die als solche gekennzeichneten Bewertungen genau und vertrauenswürdig sind.
Filter
Nur geprüfte Kaufbewertungen
Nur Meinungen von Deutschland